10-Amp Pro Brushless ESC
Key Features
- Up to 10-amp continuous current with proper air flow
- Programmable motor braking
- Safe power-arm mode prevents accidental starts
- Programmable low-voltage cutoff with settings for 2-cell Li-Po (6V), 3-cell Li-Po (9V) or 70% of battery starting voltage
- Programmable throttle input range (1.1ms–1.9ms or Auto Select)
- Auto motor shut down if signal is lost or there is interference
- Programmable timing—2 user-selectable ranges for use with a large variety of brushless motors
- Pre-wired connectors—JST on battery input and 2mm female gold bullets on motor output leads
- Soft start
Overview
This
controller has been designed for use in radio control aircraft and to
support continuous currents of up to 10 amps when using 2–3 cell Li-Po
battery packs and up to 4 sub-micro servos. Standard features include
advance BEC and safe power-arming along with programmable features such
as low-voltage cutoff, braking, timing and throttle input range.
Specs
- Brake:Yes - Programmable
- Continuous Maximum Current:10 amps
- Input Connector Types:20AWG with JST connector
- Output Connector Types:20AWG with 2mm Female Gold Bullet Connectors
- Momentary Peak Current:12A (15 sec)
- Dimensions (WxLxH):17.5 x 30 x 10 mm (.7 x 1.2 x .4 in)
- Weight:10 g (.35 oz)
- Cells w/BEC:2-3S Li-Po or 6-10 Ni-MH/Ni-Cd
