30-Amp Pro Switch-Mode BEC Brushless ESC
Key Features
- Up to 30-amp continuous current with proper airflow, 35-amp peak
- 5-volt Switch-Mode BEC circuit capable of 700mAh continuous current on any recommended input voltage
- Drives up to 5 analog or 4 digital sub-micro servos with the BEC
- 3S-4S Li-Po or 9- to 12-cell Ni-MH/Ni-Cd input voltage
- Programmable motor braking
- Safe power-arm mode prevents accidental starts
- Programmable low voltage cut-off with settings for 3S Li-Po (9.2V), 4S Li-Po (12V) or 74% of battery starting voltage
- Programmable soft start for helis and airplanes
- Auto motor shutdown if signal is lost or there is interference
- Programmable timing - 5 user-selectable ranges for use with a larger variety of brushless motors
- Heli mode for starting the motor with a low speed ratio
- Optional RS232 Serial Link available for programming (EFLARS232)
- Pre-wired connectors - E-flite EC3 connectors on battery input and 3.5mm female gold bullets on motor output leads
Overview
E-flite’s 30-amp Pro SB brushless ESC offers up
to 30 amps of continuous current with proper airflow and a peak of 35
amps. It drives up to 5 analog or 4 digital sub-micro servos with the
BEC on any recommended input voltage. This brushless ESC includes
programmable motor braking, soft start for helis and planes, timing,
throttle input range, and low-voltage cutoff. It also features auto
motor shutdown in case of lost signal or interference. The safe
power-arm mode prevents accidental starts.
