Pre-Order yours now!
Blade 450 3D RTF
Key Features
- The DS76-series servos are specially designed to deliver maximum power and precision for extreme 3D heli flight
- The G210HL gyro uses the latest in MEMS technology to provide amazing holding power during the most aggressive 3D maneuvers
- The robust 35A speed controller is engineered to efficiently channel the high current flow of most any high-C 3S Li-Po battery
- The
compact 4.0 gram AR6115E receiver provides the superior response of
Spektrum DSM® control as well as the benefit of ServoSync which
dramatically enhances the precision of any CCPM heli
- The rotor head mechanics have been optimized to provide the most aggressive 3D control response possible
Overview
The Blade 450 3D RTF blasts ready-to-fly 3D heli
performance to new levels of precision and power. It comes completely
assembled and equipped for aggressive 3D aerobatics with
state-of-the-art electronics and mechanics you would expect to find in
more expensive kits that take hours to build. It’s even been flight
tested and had the rotors balanced at the factory so you don’t have to
do any setup. Simply charge its 3S 2200mAh 30C Li-Po battery and fly.
Needed to Complete
Nothing! Everything you need is included in the box.
Specs
| Type: |
Collective Pitch Electric 3D Heli |
| Main Rotor Diameter: |
28.4 in (720mm) |
| Tail Rotor Diameter: |
5.6 in (142mm) |
| Gross Weight: |
26.9 oz (760g) |
| Length: |
25.8 in (655mm) |
| Motor Size: |
420H brushless outrunner, 3800Kv (installed) |
| Kit/ARF/RTF: |
RTF |
| Minimum Age Recommendation: |
14 years |
| Experience Level: |
Advanced |
| Recommended Environment: |
Outdoor |
| Assembly Time: |
Less than 1 Hour |
| Is Assembly Required: |
No |
Needed to Complete
Nothing! Everything you need is included in the box.
Tech Notes
The Blade 450 3D uses a new design on the main
rotor blades (BLH1615). The blades used in the Blade 400 3D look
similar but are not the same (EFLH1415A). Do NOT use EFLH1415A on the
new Blade 450 3D. Although these blades will work fine on the Blade 400
3D, the Blade 450 3D is a more powerful helicopter and using EFLH1415A
will create an unsafe condition. BLH1615 is safe to use on BOTH the
Blade 450 3D and Blade 400 3D.
To check if your blades are the
new BLH1615 design, simply look at the mounting hole. If there is a
brass insert, the blades are BLH1615. If there is not a brass insert
present, the blades are EFLH1415A and should not be used on the Blade
450 3D in any circumstance.
Here is link to an image of both blades showing the difference to look for:
http://www.horizonhobby.com/ProdInfo/Gallery/BLH_450_bladecompare.jpg
