Castle BEC
Key Features
- Elemenates the need for a sperate battery for the reciever and servos
Overview
Our
Battery Eliminator Circuit is a little device that eliminates the need
for a receiver and servo battery pack. It draws higher voltage from the
motor batteries and drops it to a voltage level that is suitable for
your receiver and servos. This is required in applications which draw
high power for multiple servos or use more than 3S motor packs, as most
ESCs with linear BECs are not designed for these applications.
Specifications:
Current Output: Peak: 10 amps
Continuous:
<12 volts input = 7 amps*
<24
volts input = 5 amps**Ratings are determined with a 5mph airflow on the
BEC. Servo connectors are not rated for current in excess of 5 amps.
Users are encouraged to replace the connectors if more than 5 amp
currents are anticipated.
Output Voltage: Output 5.1 volts out of the package, user may set output voltage from 4.8 to 9 using the Castle Link (sold separately).
Input Voltage: 5v to 25.2v (2S to 6S LiPo)
Length: 1.2” (30mm)
Width: 0.6” (15mm)
Height: 0.4” (10mm)
Weight: 0.4 oz (11 grams)
