Radian Pro BNF
Key Features
- 5-channel control - throttle, aileron, elevator, rudder and flaps
- Powerful 480-size 960Kv brushless outrunner motor installed
- E-flite® Pro 30A brushless ESC installed
- Ready to fly in minutes
- Durable, lightweight and repairable Z-Foam™ construction
- Spektrum 2.4GHz DSMX AR600 receiver installed
- 3S 11.1V 1300mAh Li-Po battery pack included
- 2- to 3-cell DC LiPo balancing charger included
- Requires a full-range DSM2/DSMX aircraft transmitter (sold separately)
Overview
Designed with experienced sailplane pilots in
mind, the Radian® Pro comes out of the box with ailerons and functioning
flaps that let you take advantage of sailplane mixing functions like
reflex, camber and crow. But you don’t have to have a programmable
system to fly it. Anyone with a 5-channel sport radio can enjoy basic
four-channel control with flaps using the included Y-harness.
Like the original Radian, the Radian Pro also comes
equipped with a powerful 480-size 960Kv brushless motor system that can
catapult it to altitude in seconds. Its airframe is constructed from the
same tough Z-Foam™ material and has been reinforced with fiberglass
blades in the fuselage and wing to reduce flex. This reinforcement,
along with that of the carbon fiber rod in the wing, make it possible
for you to achieve a level of soaring precision with the Radian Pro
that’s on par with many competition gliders.
Best of all, you can have this Bind-N-Fly® version flying
in the time it takes you to charge the included battery pack and bind
its Spektrum AR600 receiver to your full-range DSM2/DSMX aircraft system
(sold separately). To take full advantage of the capabilities of the
Radian Pro, a programmable radio system with sailplane mixing functions
is recommended
Needed to Complete
A 5+ Channel DSM2/DSMX compatible Transmitter
A programmable 6+ Channel DSM2/DSMX Transmitter is required for advanced sailing mixing functions
Specs
| Wingspan: |
78.5in (2000mm) |
| Overall Length: |
45.0 in (1140mm) |
| Flying Weight: |
34.6oz (980g) |
| Motor Size: |
480 Outrunner Brushless Motor 960kV |
| Radio: |
AR600 DSMX 6 Channel Receiver (included) requires DSM2/DSMX compatible radio |
| CG (center of gravity): |
2.75 in (70mm) back from the leading edge of the wing at the root |
| Prop Size: |
9.75 x 7.5 Inch Folding Prop |
| Speed Control : |
E-Flite 30Amp Pro Switch-Mode Brushless ESC |
Needed to Complete
A 5+ Channel DSM2/DSMX compatible Transmitter
A programmable 6+ Channel DSM2/DSMX Transmitter is required for advanced sailing mixing functions
